comm™ - IPC-3A Integrated WizarSwitch

comm Integrated WizarSwitch - IPC-3A

Introduction

comm Integrated WizarSwitch (IPC Series) - Designed to control your Audiovisual Equipment in the most simplified ways via RS-232 commands; reasonably priced and works with most projectors and plasma displays.

Widely used in Classrooms, Auditoriums, Lecture Theatres, Conference Rooms etc.

Features

	Display Controller for your Projector, Plasma (Power ON/OFF, input source selections, volume control) via RS232 Commands
	One Touch Selection with LED Back-Lit Indications
	32 sets of pre-programmed control protocols for the different displays’ models, selection through Dip-Switch Settings
	Built-In Signal Amplifier of 350MHz
	Digital Volume control for sound level adjustments
	Volume Maximum Indicator
	Video Source Selector Syncronize with Audio output
	Audio Source Selector Over-ride Video selection
	PLUG & PLAY-EXTERNAL Output Connections

Technical Specification

Power Supply

12V DC Power Adapter

Input

	PC Signal - VGA (D-Sub 15-Pin Female)
	PC Audio - 3.5mm Mini Jack
	Video Signal - Composite Video (RCA)
	Audio Signal - Stereo / Composite Audio (RCA)
	Microphone IN - 6.35mm Phono Jack

Output

	PC Signal - 2 x VGA (D-Sub 15-Pin Female) Bandwidth of 350MHz
	Video Signal - Composite Video (RCA)
	Audio Signal - 3.5mm Mini Jack
	RS232 - 2.5mm Mini Jack
	Microphone - 14 steps to Maximum Volume

Communication Control

	Serial Control Port - RS232
	Baud Rate - 9600, 19200, 38400, 115200
	Pre-programmed 32 sets of control protocols; Selection through Dip-Switch Setting

Selector Switch

	Display ON
	Display OFF
	Volume UP / MUTE / DOWN
	Source Selector (Switch between PC or Video Input)
	Audio Selector (Select from PC, Video, MIC Audio)
	Auto Sync (Toggle button)
	Blank (Toggle Button)